Oracle Exam 2026 1z0-1104-25 Dumps Updated Questions UPDATED May-2026
Get The Most Updated 1z0-1104-25 Dumps To Oracle Cloud Infrastructure Certification
Oracle 1z0-1104-25 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 13
Task 5: Create a Certificate
Create a certificate, where:
Certificate name: PBT-CERT-01-<username>
For example, if your username is 99008677-lab.user01, then the certificate name should be PBT-CERT-
01990086771abuser01
Ensure you eliminate special characters from the user name.
Common name: PBT-CERT-OCICERT-01
Certificate Authority: PBT-CERT-CA-01 (created in the previous task)
Answer:
Explanation:
See the solution below in Explanation.
Explanation:
Since I can't create resources or retrieve OCIDs directly in your OCI environment, I'll provide a step-by-step solution based on verified OCI documentation and best practices as of 02:30 PM BST on Thursday, June 12,
2025. Follow these instructions precisely in the OCI Console or CLI, using the preconfigured PBI_Vault_SP vault and the PBT-CERT-CA-01<username> Certificate Authority created in the previous task. Replace
<username> with your actual username (e.g., 99008677-lab.user01), ensuring special characters are removed.
Task 5: Create a Certificate
Step 1: Access the OCI Vault
* Log in to the OCI Console.
* Navigate toIdentity & Security>Vault.
* Select the root compartment.
* Locate and click on the vault named PBI_Vault_SP.
Step 2: Create the Certificate
* In the PBI_Vault_SP vault details page, underResources, clickCertificates.
* ClickCreate Certificate.
* Enter the following details:
* Name: Replace <username> with your username (e.g., if your username is 99008677-lab.user01, remove special characters like - and . to get 99008677labuser01, then use PBT-CERT-
0199008677labuser01).
* Common Name: Enter PBT-CERT-OCICERT-01.
* Certificate Authority: Select the PBT-CERT-CA-01<username> CA created in Task 4 (e.g., PBT-CERT-CA-0199008677labuser01).
* Subject: Leave as default or adjust (e.g., Organization, Country) if required.
* Validity Period: Set as needed (e.g., 1 year), or use the default.
* Compartment: Ensure it's set to the root compartment.
* ClickCreate Certificateand wait for the certificate to be issued.
Step 3: Verify the Certificate
* After creation, go to theCertificatessection under PBI_Vault_SP.
* Confirm the certificate PBT-CERT-01<username> (e.g., PBT-CERT-0199008677labuser01) is listed and its status is active.
NEW QUESTION # 14
Challenge 2 -Task 1
In deploying a new application, a cloud customer needs to reflect different security postures. If a security zone is enabled with the Maximum Security Zone recipe, the customer will be unable to create or update a resource in the security zone if the action violates the attached Maximum Security Zone policy.
As an application requirement, the customer requires a compute instance in the public subnet. You therefore, need to configure Custom Security Zones that allow the creation of compute instances in the public subnet.
Review the architecture diagram, which outlines the resoures you'll need to address the requirement:
Preconfigured
To complete this requirement, you are provided with the following:
Access to an OCI tenancy, an assigned compartment, and OCI credentials
Required IAM policies
Task 4: Create a Public Subnet
Create a public subnet named IAD-SP-PBT-PUBSNET-01, within the VCN IAD-SP-PBT-VCN-01 use a CIDR block of 10.0.1.0/24 and configure the subnet to use the internet Gateway See the solution below in Explanation.
Answer:
Explanation:
To create a public subnet named IAD-SP-PBT-PUBSNET-01 within the VCN IAD-SP-PBT-VCN-01 using a CIDR block of 10.0.1.0/24 and configure it to use the Internet Gateway, follow these steps based on the Oracle Cloud Infrastructure (OCI) Networking documentation.
Step-by-Step Solution for Task 4: Create a Public Subnet
* Log in to the OCI Console:
* Use your OCI credentials to log in to the OCI Console (https://console.us-ashburn-1.oraclecloud.
com).
* Ensure you have access to the assigned compartment.
* Navigate to Virtual Cloud Networks:
* From the OCI Console, click the navigation menu (hamburger icon) on the top left.
* UnderNetworking, selectVirtual Cloud Networks.
* Select the VCN:
* Locate and click on the VCN named IAD-SP-PBT-VCN-01 created in Task 3.
* UnderResources, selectSubnets.
* Create a New Subnet:
* Click theCreate Subnetbutton.
* Configure the Subnet Details:
* Name:Enter IAD-SP-PBT-PUBSNET-01.
* Compartment:Ensure it is set to the assigned compartment.
* Subnet Type:SelectPublic Subnet.
* CIDR Block:Enter 10.0.1.0/24.
* Route Table:Select the default route table associated with the VCN (ensure it includes a route to the Internet Gateway with destination 0.0.0.0/0).
* Subnet Access:SelectPublic Subnetand ensure the Internet Gateway is associated.
* DHCP Options:Leave as default or customize if required.
* Security List:Use the default security list or create a new one with appropriate ingress/egress rules (e.g., allow TCP port 22 for SSH and all egress traffic).
* Associate the Internet Gateway:
* Verify that the subnet is configured to route traffic through the Internet Gateway. This is automatically handled if you selected the public subnet option and the VCN's route table is correctly set (as configured in Task 3).
* If needed, edit the route table for the subnet to ensure a rule exists:
* Destination CIDR Block:0.0.0.0/0
* Target Type:Internet Gateway
* Target:Select the Internet Gateway associated with IAD-SP-PBT-VCN-01.
* Create the Subnet:
* ClickCreateto provision the subnet.
* Once created, the subnet will be listed under the VCN's subnets.
* Verify the Configuration:
* Go to the subnet details page for IAD-SP-PBT-PUBSNET-01.
* Confirm the CIDR block is 10.0.1.0/24 and that it is a public subnet with Internet Gateway access.
Notes
* Ensure the CIDR block 10.0.1.0/24 does not overlap with existing subnets in the VCN (10.0.0.0/16, including 10.0.10.0/24 from Task 3).
* The Internet Gateway association relies on the route table configuration from Task 3. If it's missing, update the route table as described in Step 6.
NEW QUESTION # 15
Task 3: Create a Master Encryption Key
Note: OCI Vault to store the key required by this task is created in the root compartment as PBI_Vault_SP Create an RSA Master Encryption Key (MEK), where:
Key name: PBT-CERT-MEK-01-<username>
For example, if your username is 99008677-lab.user01, then the MEK name should be PBT-CERT-MEK-
01990086771abuser01
Ensure you eliminate special characters from the user name.
Key shape: 4096 bits
Enter the OCID of the Master Encryption Key created in the provided text box:
Answer:
Explanation:
See the solution below in Explanation.
Explanation:
Task 3: Create a Master Encryption Key
Step 1: Access the OCI Vault
* Log in to the OCI Console.
* Navigate toIdentity & Security>Vault.
* Select the root compartment.
* Locate and click on the vault named PBI_Vault_SP.
Step 2: Create the Master Encryption Key
* In the PBI_Vault_SP vault details page, underResources, clickKeys.
* ClickCreate Key.
* Enter the following details:
* Name: Replace <username> with your username (e.g., if your username is 99008677-lab.user01, remove special characters like - and . to get 99008677labuser01, then use PBT-CERT-MEK-
0199008677labuser01).
* Key Shape: SelectRSAwith4096 bits.
* Protection Mode: SelectHSM(Hardware Security Module) if available, orSoftwareif HSM is not required (based on vault capabilities).
* Compartment: Ensure it's set to the root compartment (where PBI_Vault_SP resides).
* Leave other settings (e.g., key usage) as default unless specified.
* ClickCreate Keyand wait for the key to be generated.
Step 3: Retrieve and Enter the OCID
* After the key is created, go to theKeyssection under PBI_Vault_SP.
* Click on the key named PBT-CERT-MEK-01<username> (e.g., PBT-CERT-MEK-
0199008677labuser01).
* Copy theOCID(a long string starting with ocid1.key., unique to your tenancy) from the key details page.
* Enter the copied OCID exactly as it appears into the provided text box.
NEW QUESTION # 16
You're managing an Oracle Cloud Infrastructure (OCI) environment where a public website hosts downloadable assets stored in Object Storage buckets. These buckets need to be publicly accessible for website visitors, but Cloud Guard keeps flagging them as security risks.
How can Cloud Guard be configured to ignore problems specific to public buckets while still ensuring security checks are applied to other resources that require them?
- A. Dismiss problems associated with those resources.
- B. A public bucket is a security risk, so Cloud Guard will keep detecting it.
- C. Resolve or remediate the problems by making the buckets private.
- D. Fix the baseline by configuring the Conditional groups for the detector.
Answer: D
NEW QUESTION # 17
A company has deployed OCI Zero Trust Packet Routing (ZPR) to secure its network. They have two compute instances, VM1-01 and VM-02, in a public subnet. VM-01 is tagged with the security attribute app:
vm01, and VM-02 is tagged with app:vm02. The VCN is labeled with network:vcn01, The ZPR policy states:
"What is the expected outcome of this policy?
- A. VM-01 can SSH into VM-02, but VM-02 cannot SSH into VM-01.
- B. Both VM-01 and VM-02 can SSH into each other.
- C. VM-02 can SSH into VM-01, but VM-01 cannot SSH into VM-02.
- D. Neither VM-01 nor VM-02 can SSH into each other."
Answer: A
NEW QUESTION # 18
Which Oracle Data Safe feature enables the Internal test, development, and analytics teams to operate effectively while minimizing their exposure to sensitive data?
- A. Sensitive data discovery
- B. Data encryption
- C. Data auditing
- D. Security assessment
Answer: A
NEW QUESTION # 19
Challenge 2 -Task 1
In deploying a new application, a cloud customer needs to reflect different security postures. If a security zone is enabled with the Maximum Security Zone recipe, the customer will be unable to create or update a resource in the security zone if the action violates the attached Maximum Security Zone policy.
As an application requirement, the customer requires a compute instance in the public subnet. You therefore, need to configure Custom Security Zones that allow the creation of compute instances in the public subnet.
Review the architecture diagram, which outlines the resoures you'll need to address the requirement:
Preconfigured
To complete this requirement, you are provided with the following:
Access to an OCI tenancy, an assigned compartment, and OCI credentials
Required IAM policies
Task 1: Create a Custom Security Zone Recipe
Create a Custom Security Zone Recipe named IAD-SP-PBT-CSP-01 that allows the provisioning of compute instances in the public subnet.
Enter the OCID of the created custom security zone recipe in the text box below.
Answer:
Explanation:
See the solution below in Explanation.
Explanation:
To create a Custom Security Zone Recipe named IAD-SP-PBT-CSP-01 that allows the provisioning of compute instances in a public subnet, we will follow the steps outlined in the Oracle Cloud Infrastructure (OCI) Security Zones documentation. These steps are based on verified procedures from the OCI Security Zone Guide and related resources.
Step-by-Step Solution for Task 1: Create a Custom Security Zone Recipe
* Log in to the OCI Console:
* Use your OCI credentials to log in to the OCI Console (https://console.us-ashburn-1.oraclecloud.
com).
* Ensure you have access to the assigned compartment provided in the tenancy.
* Navigate to Security Zones:
* From the OCI Console, go to the navigation menu (hamburger icon) on the top left.
* UnderGovernance and Administration, selectSecurity Zones.
* Create a New Security Zone Recipe:
* In the Security Zones dashboard, click on theRecipestab.
* Click theCreate Recipebutton.
* Configure the Recipe Details:
* Name:Enter IAD-SP-PBT-CSP-01.
* Description:(Optional) Add a description, e.g., "Custom recipe to allow compute instances in public subnet."
* Leave theCompartmentas the assigned compartment provided.
* Define the Security Zone Policy:
* In the policy editor, start with a base policy. Since the Maximum Security Zone recipe restricts public subnet usage, you need to customize it.
* Add the following policy statement to allow compute instances in a public subnet:
Allow service compute to use virtual-network-family in compartment <compartment-name> where ALL { target.resource.type = 'Instance', target.vcn.cidr_block = '10.0.0.0/16', target.subnet.cidr_block = '10.0.10.0/24'
}
* Replace <compartment-name> with the name of your assigned compartment.
* This policy allows the Compute service to provision instances in the public subnet (10.0.10.0/24) within the VCN (10.0.0.0/16).
* Adjust Restrictions:
* Ensure the recipe does not inherit the Maximum Security Zone recipe's default restrictions that block public subnet usage. Explicitly allow the public subnet by including the subnet CIDR block (10.0.10.0/24) in the policy.
* Remove or modify any conflicting default rules that prohibit public subnet usage (e.g., rules blocking internet access or public IP assignment).
* Save the Recipe:
* ClickCreateto save the custom security zone recipe.
* Once created, note theOCIDof the recipe from the recipe details page. The OCID will be a unique identifier starting with ocid1.securityzonerecipe.
* Verify the Recipe:
* Go to theRecipestab and locate IAD-SP-PBT-CSP-01.
* Ensure the policy reflects the allowance for compute instances in the public subnet by reviewing the policy statement.
OCID of the Created Custom Security Zone Recipe
* The exact OCID will be generated upon creation (e.g., ocid1.securityzonerecipe.oc1..unique_string).
Please enter the OCID displayed in the OCI Console after completing Step 7.
Notes
* Ensure IAM policies are correctly configured to grant you permissions to create and manage security zone recipes in the compartment.
* The policy assumes the public subnet CIDR (10.0.10.0/24) matches the diagram. Adjust if the actual subnet CIDR differs.
* Test the recipe by associating it with a security zone and attempting to launch a compute instance to confirm compliance.
NEW QUESTION # 20
During your investigation of a load balancer issue, you discovered that all back-end servers associated with one of the affected listeners were reported as unhealthy. However, when you checked the back-end servers, they seemed to be working just fine.
What might be causing this issue?
- A. Incorrect DNS configuration
- B. Overloaded back-end servers
- C. Misconfigured health check
- D. Incorrect subnet configuration
- E. Misconfigured security rule
Answer: C
NEW QUESTION # 21
"A business has a hybrid cloud infrastructure with Oracle Linux instances running in OCI and on-premises.
They want to reduce the amount of bandwidth used when patching systems.
Which component of OS Management Hub can help to reduce the bandwidth usage for patching?
- A. Profiles"
- B. Dynamic groups
- C. Management agents
- D. Management stations
Answer: A
NEW QUESTION # 22
Challenge 2 -Task 1
In deploying a new application, a cloud customer needs to reflect different security postures. If a security zone is enabled with the Maximum Security Zone recipe, the customer will be unable to create or update a resource in the security zone if the action violates the attached Maximum Security Zone policy.
As an application requirement, the customer requires a compute instance in the public subnet. You therefore, need to configure Custom Security Zones that allow the creation of compute instances in the public subnet.
Review the architecture diagram, which outlines the resoures you'll need to address the requirement:
Preconfigured
To complete this requirement, you are provided with the following:
Access to an OCI tenancy, an assigned compartment, and OCI credentials
Required IAM policies
Task3: Create and configure a Virtual Cloud Network and Private Subnet
Createand configure virtual cloud Network (VCN) named IAD SP-PBT-VCN-01, with an internet Gateway and configure appropriate route rules to allow external connectivity.
Enter the OCID of the created VCN in the text box below.
Answer:
Explanation:
See the solution below in Explanation.
Explanation:
To create and configure a Virtual Cloud Network (VCN) named IAD-SP-PBT-VCN-01 with an Internet Gateway and appropriate route rules for external connectivity, follow these steps based on the Oracle Cloud Infrastructure (OCI) Networking documentation.
Step-by-Step Solution for Task 3: Create and Configure a VCN and Private Subnet
* Log in to the OCI Console:
* Use your OCI credentials to log in to the OCI Console (https://console.us-ashburn-1.oraclecloud.
com).
* Ensure you have access to the assigned compartment.
* Navigate to Virtual Cloud Networks:
* From the OCI Console, click the navigation menu (hamburger icon) on the top left.
* UnderNetworking, selectVirtual Cloud Networks.
* Create a New VCN:
* ClickStart VCN Wizardand selectCreate VCN with Internet Connectivity.
* VCN Name:Enter IAD-SP-PBT-VCN-01.
* Compartment:Select the assigned compartment.
* VCN CIDR Block:Enter 10.0.0.0/16 (matches the diagram's VCN CIDR).
* Public Subnet CIDR Block:Enter 10.0.10.0/24 (matches the diagram's public subnet).
* Accept the default settingsfor the public subnet and Internet Gateway creation.
* ClickCreateto provision the VCN, Internet Gateway, and public subnet.
* Verify the Internet Gateway:
* After creation, go to the VCN details page for IAD-SP-PBT-VCN-01.
* UnderResources, selectInternet Gateways.
* Ensure the Internet Gateway is attached and enabled.
* Configure Route Rules:
* In the VCN details page, underResources, selectRoute Tables.
* Select the default route table associated with the public subnet (10.0.10.0/24).
* ClickAdd Route Rules.
* Target Type:SelectInternet Gateway.
* Destination CIDR Block:Enter 0.0.0.0/0.
* Target Internet Gateway:Select the Internet Gateway created with the VCN.
* ClickAdd Route Ruleto save.
* Update Security List (if needed):
* UnderResources, selectSecurity Lists.
* Edit the default security list for the public subnet.
* Add an ingress rule:
* Source CIDR:0.0.0.0/0
* IP Protocol:TCP
* Source Port Range:All
* Destination Port Range:22 (for SSH) or as required by your application.
* Add an egress rule:
* Destination CIDR:0.0.0.0/0
* IP Protocol:All
* Save the changes.
* Note the VCN OCID:
* Return to the VCN details page for IAD-SP-PBT-VCN-01.
* Copy theOCIDdisplayed (e.g., ocid1.vcn.oc1..<unique_string>).
OCID of the Created VCN
* Enter the OCID of the created VCN (IAD-SP-PBT-VCN-01) into the text box. The exact OCID will be available after Step 3 (e.g., ocid1.vcn.oc1..<unique_string>).
NEW QUESTION # 23
"You are part of the security operations of an organization with thousands of users accessing Oracle Cloud Infrastructure (OCI). It is reported that an unknown user action was executed resulting in configuration errors.
You are tasked with identifying the details of all users who were active in the last six hours along with any REST API calls that were executed.
Which OCI feature should you use?
- A. Management Agent Log Ingestion
- B. Object Collection Rule
- C. Service Connector Hub"
- D. Audit Analysis Dashboard
Answer: D
NEW QUESTION # 24
Challenge 1 - Task 1
Integrate TLS Certificate Issued by the OCI Certificates Service with Load Balancer You are a cloud engineer at a tech company that is migrating its services to Oracle Cloud Infrastructure (OCI). You are required to set up secure communication for your web application using OCI's Certificate service. You need to create a Certificate Authority (CA), issue a TLS/SSL server certificate, and configure a load balancer to use this certificate to ensure encrypted traffic between clients and the backend servers.
Review the architecture diagram, which outlines the resources you'll need to address the requirement.
Preconfigured
To complete this requirement, you are provided with the following:
Access to an OCI tenancy, an assigned compartment, and OCI credentials
Required IAM policies
OCI Vault to store the secret required by the program, which is created in the root compartment as PBI_Vault_SP Task 1: Create and Configure a Virtual Cloud Network (VCN) Create a Virtual Cloud Network (VCN) namedPBT-CERT-VCN-01with the following specifications:
* VCN with a CIDR block of 10.0.0.0/16
* Subnet 1 (Compute Instance):
* Name:Compute-Subnet-PBT-CERT
* CIDR Block:10.0.1.0/24
Subnet 2 (Load Balancer):
* Name:LB-Subnet-PBT-CERT-SNET-02
* CIDR Block:10.0.2.0/24
Internet Gatewayfor external connectivity
Route table and security lists:
* Security List namedPBT-CERT-CS-SL-01for Subnet 1 (Compute-Subnet-PBT-CERT) to allow SSH (port 22) traffic
* Security List namedPBT-CERT-LB-SL-01for Subnet 2 (LB-Subnet-PBT-CERT) to allow HTTPS (port 443) traffic
"Enter the OCID of the created VCN in the text box below.
Answer:
Explanation:
See the solution below in Explanation.
Explanation:
Challenge 1: Integrate TLS Certificate Issued by the OCI Certificates Service with Load Balancer Task 1: Create and Configure a Virtual Cloud Network (VCN) Step 1: Create the Virtual Cloud Network (VCN)
* Log in to the OCI Console.
* Navigate toNetworking>Virtual Cloud Networks.
* ClickCreate Virtual Cloud Network.
* SelectVCN with Internet Connectivity(to include an Internet Gateway by default).
* Enter the following details:
* Name: PBT-CERT-VCN-01
* Compartment: Select your assigned compartment.
* VCN CIDR Block: 10.0.0.0/16
* Leave other settings as default (e.g., create a new public subnet and route table).
* ClickCreate Virtual Cloud Network. Wait for the VCN to be created.
Step 2: Create Subnet 1 (Compute-Subnet-PBT-CERT)
* In the VCN details page for PBT-CERT-VCN-01, clickSubnetsunderResources.
* ClickCreate Subnet.
* Enter the following details:
* Name: Compute-Subnet-PBT-CERT
* Subnet Type: Regional
* CIDR Block: 10.0.1.0/24
* Route Table: Select the default route table created with the VCN.
* Subnet Access: Public Subnet (to allow internet access).
* DNS Resolution: Enabled.
* ClickCreate.
Step 3: Create Subnet 2 (LB-Subnet-PBT-CERT-SNET-02)
* In the VCN details page, clickSubnetsunderResources.
* ClickCreate Subnet.
* Enter the following details:
* Name: LB-Subnet-PBT-CERT-SNET-02
* Subnet Type: Regional
* CIDR Block: 10.0.2.0/24
* Route Table: Select the default route table created with the VCN.
* Subnet Access: Public Subnet (to allow internet access for the load balancer).
* DNS Resolution: Enabled.
* ClickCreate.
Step 4: Verify Internet Gateway
* In the VCN details page, underResources, clickInternet Gateways.
* Ensure an Internet Gateway is listed and attached to PBT-CERT-VCN-01. If not created, clickCreate Internet Gateway, name it (e.g., PBT-CERT-IGW), and attach it.
Step 5: Configure Route Table
* In the VCN details page, underResources, clickRoute Tables.
* Select the default route table or create a new one named PBT-CERT-RT-01.
* ClickAdd Route Rule. 4 -Destination CIDR Block: 0.0.0.0/0
* Target Type: Internet Gateway
* Target: Select the Internet Gateway created (e.g., PBT-CERT-IGW).
* ClickAdd Route Ruleand save.
Step 6: Create Security List for Subnet 1 (Compute-Subnet-PBT-CERT)
* In the VCN details page, underResources, clickSecurity Lists.
* ClickCreate Security List.
* Enter the following:
* Name: PBT-CERT-CS-SL-01
* Compartment: Your assigned compartment.
* Add the following ingress rule:
* Source CIDR: 0.0.0.0/0 (allow from any source, adjust as per security needs)
* IP Protocol: TCP
* Source Port Range: All
* Destination Port Range: 22 (for SSH)
* Allows: Traffic
* ClickCreate.
Step 7: Create Security List for Subnet 2 (LB-Subnet-PBT-CERT-SNET-02)
* In the VCN details page, underResources, clickSecurity Lists.
* ClickCreate Security List.
* Enter the following:
* Name: PBT-CERT-LB-SL-01
* Compartment: Your assigned compartment.
* Add the following ingress rule:
* Source CIDR: 0.0.0.0/0 (allow from any source, adjust as per security needs)
* IP Protocol: TCP
* Source Port Range: All
* Destination Port Range: 443 (for HTTPS)
* Allows: Traffic
* ClickCreate.
Step 8: Retrieve and Enter VCN OCID
* Go to the VCN details page for PBT-CERT-VCN-01.
* Copy theOCIDfrom the VCN information section.
* Enter the OCID in the provided text box.
NEW QUESTION # 25
You are a security architect at your organization and have noticed an increase in cyberattacks on your applications, including Cross-Site Scripting (XSS) and SQL Injection. To mitigate these threats, you decide to use OCI Web Application Firewall (WAF).
Which type of OCI WAF rule should you configure to protect against these attacks?
- A. Rate Limiting rule
- B. Encryption rule
- C. Access control rule
- D. Protection rule
Answer: D
NEW QUESTION # 26
"You are designing a secure access strategy for compute instances deployed within a private subnet of an OCI Virtual Cloud Network (VCN). Your security policy requires that no compute instances in the private subnet should have direct Internet access, and administrative access should be controlled.
Which statement best describes the role of an OCI Bastion in securing access to these private compute instances?
- A. It creates a secure, publicly accessible entry point to access target resources in a private subnet."
- B. It serves as a secondary authentication point, verifying user credentials before granting access to the compute instance.
- C. It provides a direct public endpoint for the compute instance, enabling remote access.
- D. It acts as a firewall, blocking any external access to the private compute instance.
Answer: A
NEW QUESTION # 27
According to the Oracle Cloud Infrastructure (OCI) Shared Responsibility Model, which statement accurately reflects OCI's responsibility for security?
- A. OCI provides security only for free-tier services; customers secure everything else.
- B. OCI has no security responsibilities; customers need to secure their resources.
- C. OCI is responsible for securing the underlying infrastructure but not customer data.
- D. Customers are responsible for securing both infrastructure and data.
Answer: C
NEW QUESTION # 28
......
Oracle Certified 1z0-1104-25 Dumps Questions Valid 1z0-1104-25 Materials: https://certkingdom.vce4dumps.com/1z0-1104-25-latest-dumps.html